Equipment ID (NOT PROGRAMMED) on Caterpillar ET Software

 

Equipment ID

Equipment ID allows the customer to enter a description into the Electronic Control Module (ECM) in order to identify the Machine, such as Model/ Unit Number. A maximum of 17 characters may be entered in the field. This Parameter is only for reference by the Customer. Note: This Parameter is not required.

#Accessing
To access the Equipment ID:
1). Connect CAT ET to the Service Tool connector. Read More: 

2). Select Configuration from the Service menu, or click the Configuration Tool icon.

3). Click on the plus [+] symbol to the left of a selected Configuration Group: ECM Identification Parameters, or click Expand All to display all of the Parameters in each Configuration Group for a selected ECM.
 
4). Highlight the Parameter to be changed: Equipment ID, and click the Change button. The Change Parameter Value dialog box is displayed. Enter the new value in the New Value text box (a text string of 17 characters or less).


5). Click OK to accept the new value. The Are you sure… message box will be displayed. Click Yes to change the Parameter, or click No to keep the current Parameter value. The Configuration Tool screen will be displayed.

A friend told me that I can find the answer here, I think I can try it, https://www.obd2.ltd/

评论

发表评论

此博客中的热门博文

CAT Caterpillar ET Diagnostic Adapter 3 problem solve

图片
  Recently so many people meet this problem ,after they use the cat caterpillar ET Diagnostic Adapter 3 to connect with the vehicle, the light could not turn on and could not work. How to solve this problem? CAT Caterpillar ET Diagnostic Tool (9 pin Adapter) connect with the cat vehicle ,CAT Caterpillar ET main device the light is not turn on ,and the device could not work ,as following picture. Change the all new CAT Caterpillar ET Diagnostic Tool ,the result is same . After we checked the CAT vehicle ‘s diagnostic seat, then find the question . the reason is that there is some cat vehicle’s diagnostic seat is not standard, and that is not matched with our 9 pin diagnostic connector . some people cat vehicle the diagnostic seat picture as following : our CAT Caterpillar ET Diagnostic Tool 9 pin connecter picture as following : pls check ( the left is the vehicle diagnostic seat .and the right is cat device 9 pin connecter . Vehicle connection is: A – Battery Negative
阅读全文

Injection Disabled on Status Flags Caterpillar ET Software

  Injection Disabled →If a SHUTDOWN is active,  Injection Disabled  will appear on Status Flags Caterpillar ET . →An Engine shutdown event will appear on a CAN J1939 device if the device is capable of displaying Diagnostic Codes.→No active error on Engine's display (such as: Murphy PowerView, etc), but Engine can't STARTS (Cranking only).  #Possible Causes: 1). Engine Overspeed Shutdown The Operator may be operating the Engine incorrectly. The "Engine Overspeed" parameter may be incorrectly programmed for the application, use Caterpillar ET to view the parameter setting for Engine Overspeed. 2). 75% Overspeed Verify Switch (OS Verify) Faulty on wiring, switches, or connectors. Check the 75% Overspeed Verify Switch (If installed), it will sending "Ground Signal" to the ECM while activated (Overspeed Test Switch). ECM pin 54 (C-15 Engine).   3). Low Engine Coolant Level Shutdown The Engine has been running for one minute and the Coolant Level is
阅读全文