Caterpillar Solution

  Injection Disabled →If a SHUTDOWN is active,  Injection Disabled  will appear on Status Flags Caterpillar ET . →An Engine shutdown event will appear on a CAN J1939 device if the device is capable of displaying Diagnostic Codes.→No active error on Engine's display (such as: Murphy PowerView, etc), but Engine can't STARTS (Cranking only).  #Possible Causes: 1). Engine Overspeed Shutdown The Operator may be operating the Engine incorrectly. The "Engine Overspeed" parameter may be incorrectly programmed for the application, use Caterpillar ET to view the parameter setting for Engine Overspeed. 2). 75% Overspeed Verify Switch (OS Verify) Faulty on wiring, switches, or connectors. Check the 75% Overspeed Verify Switch (If installed), it will sending "Ground Signal" to the ECM while activated (Overspeed Test Switch). ECM pin 54 (C-15 Engine).   3). Low Engine Coolant Level Shutdown The Engine has been running for one minute and the Coolant Level is...

  Caterpillar ET Software real-time Graphing #Purpose Real Time Graphing monitors ECM data and displays it in graphical form as it occurs. When running Real Time Graphing for the first time, a set of parameters must be selected to graph. #Accessing 1). Connect Cat ET to the service tool connector, and establish communication with the ECM. 2). To run the Real Time Graphing function, select Real Time Graphing from the Information menu. 3). The Real Time Graphing screen is displayed. The Select Graph Set dialog box is displayed the first time this tool is accessed. If the Select Graph Set dialog box displays: 1). Click the New button to create a new set. The Maintain Graph Sets dialog box is displayed. 2). Select a set from the Select Graph Set list box. As a graph set is selected, the parameters for that set display in the Parameters list box. →Using the up and down arrows on the keyboard, each set and its parameters can be viewed consecutively in the Select Graph Set dialog box. If...

 The old bluetooth cat et adapter iii have stopped production .the new cat caterpillar ET Diagnostic interface adapter will instead of it . The Cat caterpillar ET 3 with the lenovo x220 laptop with wifi , We will install the software before ship, so you can get it work directly after you receive it. Support：WIFI Software version: 2021B 2021B is an upgraded version of 2020A , A represents the first quarter, and C is the software updated in the third quarter. Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish Support All cars of CAT Caterpillar ET Software Function : This diagnostic app allows you to: View active and logged diagnostics. View events where irregularities occurred and were logged by the ECM. View the status of a group of parameters (temperatures, pressures, etc.) simultaneously. Record and log performance data. Graph a group of status parameters. View the current configuration of an ECM. Change ECM config...

Caterpillar adapter 3 offers several options for communication hardware. Communication Adapters are service tools consisting of a portable hardware adapter and a software PC program designed to run under Microsoft® Windows™. MPSI Pro-Link is a portable computer diagnostic analyzer. NOTE :Engines that do not have the service connector may also require the 140-9442 ATA/CDL T-Adapter. NOTE :For specific part number information, contact the Parts Department of your local dealership. Exceptions The requirements for Hydraulic Excavators B-Series (HEX) are the following: Cable Assembly HEX to PC Adapter cable In the Communications tab of the Preferences dialog box, select the Communication Adapter option from the Communication Interface Device drop-down list. Then click the Advanced button. Select the 19200 baud rate radio button. Click OK. NOTE :For specific part number information, contact the Parts Department of your local dealership.   Setting Up the Communication Adapter 3 Requireme...

  How to use Caterpillar ET Software Injection Actuation Pressure Test #Purpose The Injection Actuation Pressure Test function checks for leaks on all hydraulic components. This test allows the user to change the desired pressure and then view the actual pressure results. #Accessing To run the Injection Actuation Pressure Test function: 1). Connect Cat ET to the Service Tool connector. Read More: How to Connecting Caterpillar ET Software to the ECM. 2). Select Diagnostic Tests from the Diagnostics menu. 3). Select Injection Actuation Pressure Test from the submenu. Click Start. 4). The Injection Actuation Pressure Test screen is displayed.   #Screen Layout The Injection Actuation Pressure Test screen has the following areas: A. Display Area The Injection Actuation Pressure Test setup condition area has three columns: * Description – Provides the name of the parameter set to run the test * Required Condition – Displays the value that the parameter must meet in order to run t...

Programming the ECM using Caterpillar ET Software WinFlash                 The WinFlash tool can be used to set up and consecutively program the Flash memory of all onboard ECMs. #Instructions: To program an ECM: 1). Start a connection to the Service Tool. Read More: How to Connecting Caterpillar ET Software to the ECM. →Select one of the following ECMs…. Blank Box:#2841B017JJ Flash Required. →Select Flash.             2). Click the Browse button. The Flash File Selection dialog box is displayed.            3). Select the desired file and click Open. The WinFlash screen is displayed, and ECM/File information is populated with information from the flash file.            4). Click the Begin Flash button. If more than one ECM has been selected for flashing, the Flashing Order confirmation dialog box is displayed. This allows users to determine the order in which...