Caterpillar Solution

“Copy Configuration” Function on Caterpillar ET Software Copy Configuration The Copy Configuration function allows configuration parameter data to be sent to and from ECMs. Current functions available under Copy Configuration are: 1. Fleet Configuration The Fleet Configuration function allows configurable information that is common to several ECMs to be copied. Note: This function may be accessed without an ECM connection by selecting “Open” from the File menu, and then selecting “Fleet Configuration File.” The Fleet Configuration screen will be displayed.               Save Fleet Configuration Data to a File To save the configuration data from the ECM: -Connect CAT ET Software to the ECM, Read More: How to Connect Caterpillar ET Software to the ECM -Click on “Service – Copy Configuration – Fleet Configuration” as Figure 1-1. If no recently loaded data is available, the “No data is available…” message box is displayed. Click “Yes” to load the data from...

  Recently so many people meet this problem ,after they use the cat caterpillar ET Diagnostic Adapter 3 to connect with the vehicle, the light could not turn on and could not work. How to solve this problem? CAT Caterpillar ET Diagnostic Tool (9 pin Adapter) connect with the cat vehicle ,CAT Caterpillar ET main device the light is not turn on ,and the device could not work ,as following picture. Change the all new CAT Caterpillar ET Diagnostic Tool ,the result is same . After we checked the CAT vehicle ‘s diagnostic seat, then find the question . the reason is that there is some cat vehicle’s diagnostic seat is not standard, and that is not matched with our 9 pin diagnostic connector . some people cat vehicle the diagnostic seat picture as following : our CAT Caterpillar ET Diagnostic Tool 9 pin connecter picture as following : pls check ( the left is the vehicle diagnostic seat .and the right is cat device 9 pin connecter . Vehicle connection is: A – Battery Nega...